Dual nano SIM cards

HTC Desire 826 has two nano SIM card slots.

Use a standard nano SIM card only. Inserting a modified card that is thicker than the standard nano SIM card may cause the card to not fit properly or damage the card slot.

Inserting nano SIM cards

1. Make sure HTC Desire 826 is off and hold it securely with the front facing down.
2. Open the slot cover with your thumb or finger.
   
3. Pull the trays out from the nano SIM slots.
4. Place the nano SIM cards into the trays with the gold contacts facing up and the cut-off corner facing out.
   
5. Make sure the trays are facing up. Reinsert the trays into the slots.
6. To close the slot cover, slide the plastic hinge into the side and press the cover until it clicks into place.

Removing a nano SIM card

Important: Make sure to switch off HTC Desire 826 before removing the card.

1. Open the slot cover with your thumb or finger.
2. Pull the tray out from the SIM slot, and remove the nano SIM card.
3. To close the slot cover, slide the plastic hinge into the side and press the cover until it clicks into place.