HTC One X9 dual sim‎

Guide Downloads

< < Menu

Dual nano SIM cards

HTC One X9 has two nano SIM card slots. You can insert a LTE/WCDMA/GSM nano SIM card in either slot.

When you have two cards inserted, only one card can connect to a mobile data network. The other card will connect to the 2G network only. Go to Settings > Dual network manager to set which card connects to mobile data network.

Use a standard nano SIM card only. Inserting a modified card that is thicker than the standard nano SIM card may cause the card to not fit properly or damage the card slot.

Inserting nano SIM cards

  1. Make sure HTC One X9 is off and hold it securely with the front facing down.
  2. Open the left slot cover with your thumb or finger.
  3. Pull the tray out from the nano SIM slot.
  4. Place a nano SIM card into the tray with the card's gold contacts facing up and its cut-off corner facing out.
  5. When reinserting the tray, make sure it is facing up so that the nano SIM card doesn’t fall out. Slide the tray all the way into the slot.
  6. Close the slot cover. Press from the top to the bottom of the slot cover to lock it in place.
  7. Open the right slot cover, and do the same steps as above to insert your second nano SIM card in the tray that's in the SIM 2 slot.

    To close the right slot cover, slide the plastic hinge into the side and press the cover until it clicks into place.

Removing a nano SIM card

Important: Make sure to switch off HTC One X9 before removing the card.
  1. Open the left or right slot cover with your thumb or finger.
  2. Pull the tray out from the nano SIM slot, and remove the nano SIM card.
  3. Close the slot cover. Press from the top to the bottom of the slot cover to lock it in place.
Was this information helpful?

Can’t find what you’re looking for?