HTC Desire 626‎

Guide Downloads

< < Menu

nano SIM card

HTC Desire 626 uses a nano SIM card.
Use a standard nano SIM card only. Inserting a modified card that is thicker than the standard nano SIM card may cause the card to not fit properly or damage the card slot.

Inserting a nano SIM card

  1. Make sure HTC Desire 626 is off and hold it securely with the front facing down.
  2. Open the slot cover with your thumb or finger.
  3. Pull the tray out from the nano SIM slot.
  4. Place a nano SIM card into the tray with the card's gold contacts facing up and its cut-off corner facing out.
  5. Make sure the tray is facing up. Reinsert the tray into the slot.
  6. To close the slot cover, slide the plastic hinge into the side and press the cover until it clicks into place.

Removing a nano SIM card

Important: Make sure to switch off HTC Desire 626 before removing the card.
  1. Open the slot cover with your thumb or finger.
  2. Pull the tray out from the SIM slot, and remove the nano SIM card.
  3. To close the slot cover, slide the plastic hinge into the side and press the cover until it clicks into place.
Was this information helpful?

Can’t find what you’re looking for?