HTC U Play‎

Guide Downloads

< < Menu

Fingerprint scanner

You can quickly wake up and unlock the HTC U Play using your fingerprint. You can add up to 5 fingerprints.

When setting up and using the fingerprint scanner, follow these tips:

  • Make sure your finger and the fingerprint scanner are dry and clean.
  • Use the entire pad of your finger, including the sides and tip.
  • When recording your fingerprint, touch the scanner until it vibrates.
  • The fingerprint scanner has 360° readability—you can touch a recorded finger at any angle to the scanner to turn on the screen or unlock the HTC U Play.
Note: You may not be able to set the fingerprint scanner to unlock HTC U Play, if you've signed in to an Exchange ActiveSync account that requires you to set a different screen lock option (such as password). Check with your Exchange Server administrator if your Exchange ActiveSync account supports the fingerprint scanner.

Adding a fingerprint the first time

  1. From the Home screen, tap , and then tap Settings > Fingerprint scanner.
  2. Tap Add fingerprint.

    If you haven't already set up a lock screen pattern, PIN, or password, you'll be asked to set one up. See Setting a screen lock.

  3. Tap Start.
  4. Choose which finger or thumb to use, touch the scanner until it vibrates, then lift your finger or thumb.
  5. Repeatedly touch the scanner until the fingerprint has been successfully recorded. You'll get the best results if you hold your finger in the same direction when touching the scanner.
  6. After you've successfully recorded your fingerprint, tap Done.
You can now use your fingerprint to wake up and unlock your HTC U Play.
Warning: You'll need to input your backup lock screen pattern, PIN, or password if the scanner doesn't identify your fingerprint after five attempts. You'll only have 10 additional attempts before your data is deleted from the HTC U Play.

Adding, removing, or editing fingerprints

  1. From the Home screen, tap , and then tap Settings > Fingerprint scanner.
  2. Enter your pattern, PIN, or password.
  3. Do any of the following:
    • Tap Add fingerprint to add another fingerprint.
    • Tap a recorded fingerprint to rename or delete it.
    • Tap Reset fingerprint scanner to delete all recorded fingerprints.
    • Select Wake up screen if you want to be able to tap the fingerprint scanner to wake up and unlock the screen.
Was this information helpful?

Can’t find what you’re looking for?