UA Band‎

Guide Downloads

< < Menu

Charging your UA Band

Warning:
  • Make sure that connectors on UA Band are dry before you use the charging cable, since the charging cable is not water-resistant.
  • To avoid electrical short circuits, unplug the charging cable from the power source when not charging UA Band.
  1. Connect your UA Band to the supplied charging cable.
    Important: Make sure that the dot marker on the charger is aligned with the marker on the band. The charging cable will still attach when put on backwards, but will not charge.
    The indicator LED will turn red when charging.
  2. Plug the USB cable end into a power source. The indicator LED shows green when charging is complete.
Related How-tos
Was this information helpful?

Can’t find what you’re looking for?