HTC Desire 626 dual sim‎

Guide Downloads

< < Menu

Dual nano SIM cards

HTC Desire 626 dual sim has two nano SIM card slots. You can insert a 4G LTE/3G nano SIM card in either slot.

When you have two cards inserted, only one card can connect to a mobile data network. The other card will connect to the 2G network only. Go to Settings > Dual network manager to set which card connects to mobile data network.

Use a standard nano SIM card only. Inserting a modified card that is thicker than the standard nano SIM card may cause the card to not fit properly or damage the card slot.

Inserting nano SIM cards

  1. Make sure HTC Desire 626 dual sim is off and hold it securely with the front facing down.
  2. Open the slot cover with your thumb or finger.
  3. Pull the trays out from the nano SIM slots.
  4. Place the nano SIM cards into the trays with the gold contacts facing up and the cut-off corner facing out.
  5. When reinserting the trays, make sure they are facing up so that the nano SIM cards don’t fall out. Slide the trays all the way into the slots.
  6. Close the slot cover. Press from the top to the bottom of the slot cover to lock it in place.

Removing a nano SIM card

Important: Make sure to switch off HTC Desire 626 dual sim before removing the card.
  1. Open the slot cover with your thumb or finger.
  2. Pull the tray out from the nano SIM slot, and remove the nano SIM card.
  3. Close the slot cover. Press from the top to the bottom of the slot cover to lock it in place.
Was this information helpful?

Can’t find what you’re looking for?