HTC 10

User guides
Carrier

< < Menu

nano SIM card

HTC 10 uses a nano SIM card.
Use a standard nano SIM card only. Inserting a modified card that is thicker than the standard nano SIM card may cause the card to not fit properly or damage the card slot.
Image warning against using a modified SIM card.

Inserting a nano SIM card

  1. Hold the phone face down.
  2. Insert the tip of the tray eject tool that came with your phone—or a small bent paperclip—into the nano SIM tray eject hole.
  3. Push the tip all the way into the hole until the tray ejects, and then pull the tray out.
  4. Place the nano SIM card into the tray, with the gold contacts facing up and cut-off corner facing out.
  5. Insert the card tray back into the slot.

Removing a nano SIM card

Important: Make sure to switch off HTC 10 before removing the card.
  1. Hold the phone face down.
  2. Insert the tip of the tray eject tool that came with your phone—or a small bent paperclip—into the nano SIM tray eject hole.
  3. Push the tip all the way into the hole until the card tray ejects.
  4. Pull the card tray out, and remove the nano SIM card.
  5. Make sure that you insert the empty card tray back into the slot.
Was this information helpful?
Yes
No

Can’t find what you’re looking for?