Updates & downloads


Verizon HTC 10 Software Update Instructions 4.12.2018

This software upgrade available for your HTC 10 provides the following key enhancements:

· Android 8.0 (Oreo)
· January 2018 Android security patches

Details

Before you proceed, please confirm that this software upgrade to 3.18.605.13 is a newer version than what is currently loaded on your device. If it is the same version, there is no need to reload the software. Navigate to the Home screen then tap All apps > Settings > About > Software Information and locate the Software number . If your Software number is less than 3.18.605.13 , you should proceed with the upgrade.

WARNING: During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger as this might stop the update and your device may be rendered inoperable!

Getting Started

Before you proceed with the update, make sure you have done the following:

· Set aside approximately 20 minutes to allow the device to update
· Connect the device to a charger
· Ensure the battery is charged to at least 35%
· If available, connect to Wi-Fi to speed up the update download process

Installation instructions

To manually perform the update, follow these steps below:

1. From the Home screen, tap All apps , then tap Settings .

2. Tap Software update .

3. Tap Check new .

4. Tap DOWNLOAD to download the update.

5. If downloading the update using the mobile data network (not connected to Wi-Fi), you may be prompted with a data fee warning message. If this is acceptable, tap YES to start the upgrade process.

6. The status of the download can be checked in the Notifications pull down.

7. Once the download is complete, you will be prompted to install from the Notifications pull down. Tap the System update to begin the upgrade process.

8. Tap OK to begin the update process to software version 3.18.605.13.

WARNING: During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger as this might stop the update and your device may be rendered inoperable!

9. The device will reboot and begin installation. You will not be able to use your device during the installation process (approximately 10 minutes).

10. Once the system update is complete, tap OK to continue.

11. For best performance, open Play Store and tap the Menu icon, then select My apps and ensure all installed apps are updated.

Important Information

  • If you choose the Defer option, you will have to set a date and time to start the process. You can also manually install by going to Settings > Software update > Install deferred SW and choose Yes for the pop-up box that appears.

  • If the system update fails to install, you will get an error screen. However, this only means the software did not install properly. Long press the Power key to reboot the device. The device will power back on with original software and you can follow the installation instructions above to upgrade the software.

  • If your battery level is too low, the installation will not proceed. You will need to charge your device until it has enough battery power to continue. The update will not proceed if you less than 25% battery life left.

  • If the device is in roaming condition, it will not able to initiate any software update connection including network initiated or user initiated session. The Check new option in Software update will be grayed out.

  • To identify your software information, you can go to Settings > About phone > Software information . After performing the update, it should show 3.18.605.13.

  • For best performance after updating, open Play Store and tap the Menu icon, then select My apps and ensure all installed apps are updated.