144.6 x 69.7 x 9.61 mm
Ambient light sensor, Proximity sensor, Accelerometer, Compass sensor, Gyro sensor, Magnetic sensor, Sensor Hub
HTC BoomSound™ with Dolby Audio™
Dual-tone metal unibody, Themes, HTC Sense™ Home, One Gallery, >Photo Editor
Android™ with HTC Sense™
NFC, Bluetooth® 4.1, Wi-Fi®: 802.11 a/b/g/n/ac (2.4 & 5 GHz), DLNA®, HDMI MHL 3.0, CIR, 3.5 mm stereo audio jack, micro-USB 2.0 (5-pin) port
Qualcomm® Snapdragon™ 810, octa core 64-bit, 4 x 2.0GHz + 4 x 1.5GHz Memory1
Main camera: 20MP with sapphire cover lens, auto-focus, BSI sensor, f/2.2, 27.8mm lens, 4K video recording
Front camera: HTC UltraPixel™, BSI sensor, f/2.0, 26.8mm lens, 1080p video recording
SIM card Type
Playback: .aac, .amr, .ogg, .m4a, .mid, .mp3, .wav, .wma, .flac, ac3, ec3, eac3
Video supported formats: Playback: .3gp, .3g2, .mp4, .wmv, .avi, .mkv Recording: .mp4
ROM: 32GB / RAM: 3GB
Extended memory: microSD™ up to 2TB
Available storage is less due to phone software. Approximately 21 GB storage available for user content. Available storage is subject to change based on phone software updates and apps usage.
2G/2.5G - GSM/GPRS/EDGE: 850/900/1800/1900 MHz
3G UMTS: 850/900/1900/2100 MHz
4G LTE: FDD: Bands 1,3,5,7,8,20,28 TDD: Bands 38, 40, 41
Network bands in regions may be different, depending on the mobile operator and your location. 4G LTE only available in select countries. Upload and download speeds also depend on the mobile operator.
Capacity: 2840 mAh
Talk time: Up to 25.4 hours for 2G/ 21.7 hours for 3G
Standby time: Up to 391 hours for 2G/ 402 hours for 3G
Battery times (talk time, standby time and more) are subject to network and phone usage. A Standby time specification ("specification") is an industry standard that is only intended to allow comparison of different mobile devices under the same circumstances. Power consumption in a standby state is strongly dependent on factors including but not limited to network, settings, location, movement, signal strength and mobile traffic. Comparisons of different mobile devices using such a specification can therefore only be done in a controlled laboratory environment. When using any mobile device in real life circumstances for which the mobile device is intended, the standby time could be considerably lower and will be strongly dependent on the factors mentioned above.