HTC Desire 630 dual sim‎

Guide Downloads

< < Menu

Dual nano SIM cards

HTC Desire 630 has two nano SIM card slots.

When you have two cards inserted, only the card in slot 1 can connect to the 3G mobile data network. The other card will connect to the 2G network only.

Use a standard nano SIM card only. Inserting a modified card that is thicker than the standard nano SIM card may cause the card to not fit properly or damage the card slot.

Inserting nano SIM cards

  1. Make sure HTC Desire 630 is off and hold it securely with the front facing down.
  2. Open the slot cover with your thumb or finger.
  3. Pull the trays out from the nano SIM slots.
  4. Place the nano SIM cards into the trays with the gold contacts facing up and the cut-off corner facing out.
  5. When reinserting the trays, make sure they are facing up so that the nano SIM cards don’t fall out. Slide the trays all the way into the slots.
  6. Close the slot cover. Press from the bottom to the top of the slot cover to lock it in place.

Removing a nano SIM card

Important: Make sure to switch off HTC Desire 630 before removing the card.
  1. Open the slot cover with your thumb or finger.
  2. Pull the tray out from the nano SIM slot, and remove the nano SIM card.
  3. Close the slot cover. Press from the bottom to the top of the slot cover to lock it in place.
Was this information helpful?

Can’t find what you’re looking for?

Support
HTC Desire 630 dual sim‎
Choose your device version
CHOOSE A MANUAL
Française - Guide de démarrage rapide
Française - Mode d'emploi
Française - Guide de sécurité et de réglementation
English - Quick start guide
English - User manual
English - Safety and regulatory guide