HTC One M9‎

Korisnička uputstva

< < Menu

Wi‍-Fi connection

To use Wi‍-Fi, you need access to a wireless access point or ​“‍hotspot”.
Note: The availability and strength of a Wi‍-Fi signal varies depending on objects the Wi‍-Fi signal has to pass through (such as buildings or a wall between rooms).

Turning Wi‍-Fi on or off

  1. From the Home screen, tap , and then find and tap Settings.
  2. Tap the Wi‍-Fi On/Off switch to turn Wi‍-Fi on or off.
  3. Tap Wi-Fi to see a list of detected wireless networks.
Tip:
  • To manually scan for Wi‍-Fi networks, tap > Scan.
  • If the wireless network that you want is not listed, tap > Add network to manually add it.

Connecting to a Wi‍-Fi network

  1. Turn Wi‍-Fi on, and check the list of detected Wi‍-Fi networks.

    See Turning Wi‍-Fi on or off.

  2. Tap a Wi‍-Fi network you want to connect to.
  3. If you selected a secured network, enter the network key or password.
  4. Tap Connect. You'll see the Wi‍-Fi icon in the status bar when connected.

Connecting to a Wi‍-Fi network via WPS

If you're using a Wi‍-Fi router with Wi‍-Fi Protected Setup (WPS), you can connect HTC One M9 easily.
  1. Turn Wi‍-Fi on, and check the list of detected Wi‍-Fi networks.

    See Turning Wi‍-Fi on or off.

  2. Tap > WPS Push, and then press the WPS button on your Wi‍-Fi router.
    Note: To use the Wi‍-Fi Protected Setup (WPS) PIN method, tap > WPS Pin Entry.

Logging into a public Wi‍-Fi network automatically (WISPr)

You can set HTC One M9 to automatically log into a public Wi‍-Fi network that you regularly use. This saves you the trouble of going through the Wi‍-Fi provider's web authentication every time you connect to their Wi‍-Fi network. Just add your login credentials to the WISPr (Wireless Internet Service Provider roaming) settings.
Important: The access point of the Wi‍-Fi network needs to support the WISPr web portal. Consult the Wi‍-Fi provider for details.
  1. From the Home screen, tap , and then find and tap Settings.
  2. If Wi‍-Fi connection is off, tap the Wi‍-Fi On/Off switch to turn it on.
  3. Tap Wi-Fi.
  4. Tap > Advanced.
  5. Under WISPr settings, select Auto login and then tap WISPr account settings > Add a new account.
  6. Enter the service provider name, your login name (the full domain name), and password.
  7. Tap > Save
  8. Connect to the public Wi‍-Fi network.
Tip:
  • If you have access to several public Wi‍-Fi networks, you can add up to five sets of login credentials to the WISPr accounts list.
  • In the WISPr accounts list, press and hold an account to remove or edit it.
Da li je ova informacija bila od pomoci?

Ne mozete da pronadjete ono sto Vam je potrebno?