Take a Quick Tour

HTC Touch HD

Specification
Where to Buy
Model HTC Touch HD™ T8282
Processor Qualcomm® MSM 7201A™ 528 MHz
Operating System Windows Mobile® 6.1 Professional
Memory
ROM: 512 MB
RAM: 288 MB
Dimensions 115 mm x 62.8 mm x 12 mm
(4.358 in x 2.4722 in x 0.47 in)
Weight 147 grams (5.185 ounces) with battery
Display 3.8-inch TFT-LCD flat touch-sensitive screen with 480 x 800 WVGA resolution
Network1 HSDPA/WCDMA:
  • Europe/Asia: 900/2100 MHz
  • Up to 2 Mbps up-link and 7.2 Mbps down-link speeds
Quad-band GSM/GPRS/EDGE:
  • Europe/Asia: 850/900/1800/1900 MHz

(Band frequency, HSUPA availability, and data speed are operator dependent.)
Device Control
  • HTC TouchFLO™ 3D
  • Touch-sensitive front panel buttons
GPS GPS
Connectivity Bluetooth® 2.0 with Enhanced Data Rate and A2DP for wireless stereo headsets
Wi-Fi®: IEEE 802.11 b/g
HTC ExtUSB™ (11-pin mini-USB 2.0)
Camera

Main camera: 5 megapixel color camera with auto focus
Second camera: VGA CMOS color camera
Audio Built-in 3.5 mm audio jack, microphone, speaker, and FM radio
Ring tone formats:
  • AAC, AAC+, eAAC+, AMR-NB, AMR-WB, QCP, MP3, WMA, WAV
  • 40 polyphonic and standard MIDI format 0 and 1 (SMF)/SP MIDI
Battery2

Rechargeable Lithium-ion polymer battery
Capacity: 1350 mAh

Talk time:

  • Up to 420 minutes for WCDMA
  • Up to 480 minutes for GSM
Standby time3:
  • Up to 680 hours for WCDMA
  • Up to 440 hours for GSM

Video call time: Up to 140 minutes

(The above are subject to network and phone usage.)
Expansion Slot microSD™ memory card (SD 2.0 compatible)
AC Adapter Voltage range/frequency: 100 ~ 240V AC, 50/60 Hz
DC output: 5V and 1A
Special Features FM Radio, G-Sensor

  1. Network bands in regions other than Europe and Asia Pacific may be different, depending on the mobile operator and your location.
    Please check with your mobile operator.
  2. Battery times (talk time, standby time, and more) are subject to network and phone usage.
  3. A Standby time specification ("specification") is an industry standard that is only intended to allow comparison of different mobile phones under the same circumstances. Power consumption in a standby state is strongly dependent on factors including but not limited to network, settings, location, movement, signal strength and cell traffic . Comparisons of different mobile phones using such a specification can therefore only be done in a controlled laboratory environment . When using any mobile phone in real life circumstances for which the mobile phone is intended, the standby time could be considerably lower and will be strongly dependent on the factors as mentioned above.

Note: Specifications are subject to change without prior notice.