| |
Touch GSM |
Touch CDMA |
| Processor |
TI's OMAP™ 850, 201 MHz |
Qualcomm® MSM7500™, 400MHz |
| Operating System |
Windows Mobile® 6 Professional |
Windows Mobile® 6 Professional |
| Memory |
ROM: 128 MB
SDRAM: 64 MB DDR |
ROM: 256 MB
SDRAM: 128 MB DDR |
| Dimensions |
99.9mm (L) X 58mm (W) X 13.9mm (T) |
101mm (L) X 59.6mm (W) X 14.1mm (T) |
| Weight |
112g with battery |
112g with battery |
| Display |
2.8" LCD touch screen with backlight
240 X 320 dots resolution with 65,536 colors |
2.8" LCD touch screen with backlight
240 X 320 dots resolution with 65,536 colors |
| Network |
GSM/GPRS/EDGE Tri-band: 900, 1800, 1900 (The device will operate on frequencies available from the cellular network.) |
CDMA2000 1xEVDO/1xRTT and IS-95A/B voice or data
Dual-band (800 and 1900 MHz)
|
| Device Control |
HTC TouchFLO™
5-Way navigation control |
HTC TouchFLO™
5-Way navigation control |
| Connectivity |
Bluetooth® 2.0
Wi-Fi® IEEE 802.11 b/g
HTC ExtUSB™ (11-pin mini-USB and audio jack in one) |
Bluetooth® 2.0
HTC ExtUSB™ (11-pin mini-USB and audio jack in one)
|
| Camera |
2 megapixel CMOS color camera |
2.0 megapixel CMOS color camera |
| Audio |
Built-in microphone and speaker
Windows Media Player supported formats: AAC, AAC+, eAAC+, MP3, WMA, WAV, QCELP, MPEG4, AMR-NB, AMR-WB |
Built-in microphone and loud speaker for hands-free supported
Windows Media Player supported formats: AAC, AAC+, eAAC+, MP3, WMA, WAV, QCELP, MPEG4, AMR-NB, AMR-WB
|
| Battery |
Rechargeable Li-lon battery
Capacity: 1100 mAh
Standby time: Up to 200 hours
Talk time: Up to 5 hours |
Rechargeable Li-lon battery
Capacity: 1100 mAh
Standby time: Up to 250 hours
Talk time: Up to 3.5 hours |
| Expansion Slot |
microSD™ memory card (SD 2.0 compatible) |
microSD™ memory card (SD 2.0 compatible) |
| AC Adapter |
Voltage range/frequency: 100 ~ 240V AC, 50/60Hz
DC output: 5V and 1A |
Voltage range/frequency: 100 ~ 240V AC, 50/60Hz
DC output: 5V and 1A |
A Standby time specification ("specification") is an industry standard that is only intended to allow comparison of different mobile phones under the same circumstances. Power consumption in a standby state is strongly dependent on factors including but not limited to network, settings, location, movement, signal strength and cell traffic . Comparisons of different mobile phones using such a specification can therefore only be done in a controlled laboratory environment . When using any mobile phone in real life circumstances for which the mobile phone is intended, the standby time could be considerably lower and will be strongly dependent on the factors as mentioned above.