HTC S740

Specification
Where to Buy

Model S740
Processor Qualcomm® MSM7225™, 528MHz
Operating System Windows Mobile® 6.1 Standard
Memory ROM: 256MB
RAM: 256MB SDRAM
Dimensions (LxWxT) 116.3 mm x 43.4 mm x 16.6 mm (4.58 in x 1.71 in x 0.65 in)
Weight 140 grams (4.94 ounces) with battery
Display 2.4 inch TFT-LCD with backlight LEDs and QVGA resolution
Network1 HSDPA/WCDMA:
· Europe: 900/2100 MHz
· Up to 384 kbps up-link and 7.2 Mbps down-link speeds
Quad-band GSM/GPRS/EDGE:
· 850/900/1800/1900 MHz
(Band frequency and data speed are operator dependent.)
Device Control 4-Way navigation control with Enter button
Keyboard Slide-out 4-row QWERTY keyboard
GPS GPS and A-GPS ready
Connectivity Bluetooth® 2.0 with Enhanced Data Rate and A2DP for stereo wireless headsets
Wi-Fi®: IEEE 802.11 b/g
HTC ExtUSB™ (11-pin mini-USB 2.0 and audio jack in one)
Camera 3.2 megapixel color camera with fixed focus
Audio Built-in microphone, speaker and FM radio
Ring tone formats:
· AAC, AAC+, eAAC+, AMR-NB, AMR-WB, QCP, MP3, WMA, WAV
· 40 polyphonic and standard MIDI format 0 and 1 (SMF)/SP MIDI
Battery2 Rechargeable Lithium-ion polymer battery
Capacity: 1000 mAh
Talk time:
Up to 300 minutes for WCDMA
· Up to 350 minutes for GSM
Standby time3:
· Up to 400 hours for WCDMA
· Up to 260 hours for GSM

(The above are subject to network and phone usage.)
Expansion Slot microSD™ memory card (SD 2.0 compatible)
AC Adapter Voltage range/frequency: 100 ~ 240V AC, 50/60 Hz
DC output: 5V and 1A

  1. Network bands in regions other than Europe and Asia Pacific may be different, depending on the mobile operator and your location.
    Please check with your mobile operator.
  2. Battery times (talk time, standby time, and more) are subject to network and phone usage.
  3. A Standby time specification ("specification") is an industry standard that is only intended to allow comparison of different mobile phones under the same circumstances. Power consumption in a standby state is strongly dependent on factors including but not limited to network, settings, location, movement, signal strength and cell traffic . Comparisons of different mobile phones using such a specification can therefore only be done in a controlled laboratory environment . When using any mobile phone in real life circumstances for which the mobile phone is intended, the standby time could be considerably lower and will be strongly dependent on the factors as mentioned above.

Note: Specifications are subject to change without prior notice.