Product Support
Choose a category:
- Applications
- Audio and Ringtones
- Bluetooth
- Compatibility
- Connectivity and Internet
- Display
- General and Other
- GPS
- Mechanical
- Messaging
- Multimedia
- Phone
- Power and Battery
- Settings
- Storage Card
- Synchronization
- System and Upgrade
- Tips and Tricks
Power and Battery
- How long should it take to charge my battery? more
- Your battery can take up to 3 hours to fully charge using the AC charger. It will take much longer using the USB as that is the trickle charge function. Was this helpful? Yes | No
- Why does it take so long to charge my device using the USB? more
- The USB cable acts as a trickle charger so it will take longer than if you were using an AC charger. While the USB will work, it is recommended to use the AC charger, especially if the battery level reaches 10% or below. Was this helpful? Yes | No
- How can I optimize my battery’s performance? more
-
There are a few settings that you can change on your device that will preserve battery life.
•Turn off Bluetooth or Wi-Fi if you are not actively using it
oDisable Bluetooth: Tap Start > Comm Manager then tap Bluetooth
oDisable Wi-Fi: Tap Start > Comm Manager then tap Wi-Fi
•Adjust the settings for your Backlight. Lowering the brightness and timeout will decrease battery consumption.
oSteps: Go to Start > Settings >All Settings > System (tab) > Backlight
•Turn off any unnecessary audible notifications (email, SMS, etc.)
oSteps: Go to Start > Settings >All Settings > Personal (tab) > Sounds & Notifications > Notifications
•Customize your push email synchronization interval. Manual synchronization will save the most battery life while As Items Arrive will drain the battery more quickly.
oSteps: Go to Start > ActiveSync > Menu > Schedule
•Stop unnecessary programs that are running in the background or soft reset the device periodically.
oStop running programs: Tap the Task Manager shortcut (drop down icon in the upper right corner of the Today screen). Select desired action from drop down menu.
oSoft reset the device: Insert the stylus into the reset hole located on the bottom of the device. Was this helpful? Yes | No - Why won’t my device power on? more
-
Your battery may be drained or is not seated correctly. Try removing and reinserting the battery. If no success, try charging the device using the AC Charger. You will see an amber light while charging. Once charged, it changes to a green light.
NOTE: The End/Hang-up button is the power button on the Touch Pro2 for Verizon. The button on the top edge of the device simply controls the backlight. Was this helpful? Yes | No





