• Collapse All
• |
• Expand All

System and Upgrade

How do I remove and add programs from the Start screen? more

From the Start screen tap any empty icon showing + to add an application. Tap Remove to show those programs that can be removed. They will have an X in the bottom left-hand corner of the screen. Tap the X to remove the program from the Start screen. Was this helpful? Yes | No

How to I ensure my software is up to date? more

Visit www.htc.com/us and check the Support section for your product. You will find upgrade instructions and software if one is available for your device. Was this helpful? Yes | No

How do I check the device information? more

Tap Start > Settings > All Settings > System > Device Information to check the ROM version, ROM date, Radio version, Protocol version, and other hardware information Was this helpful? Yes | No

What is a G-Sensor? more

A G-Sensor is an accelerometer and measures the forces that act on it and allows for auto screen rotation and other device enhancements. To access G-Sensor settings tap or press Start > Settings > G-Sensor to adjust screen rotation and calibration settings. Was this helpful? Yes | No

How do I perform a soft reset? more

Perform a soft (normal) reset to clear all active program memory and shut down all programs. This is useful when your device is running slower than normal, or a program is not performing properly. If a soft reset is performed when programs are running, unsaved work is lost. Pull out the stylus and remove the back cover. Use the stylus tip to press the RESET button located under the back panel. Was this helpful? Yes | No

How do I perform a hard reset from within the OS? more

A hard reset will restore the device to the original factory settings deleting any programs or settings you have installed. To perform a hard reset within the device tap Start > Settings > All Settings > System tab > Clear Storage. Was this helpful? Yes | No

How do I perform a hard reset when the device is powered off? more

With the device turned off, press and hold the TALK/SEND, END and POWER buttons until you see a message on the screen. Release the TALK/SEND, END and POWER buttons. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset. Once the restore screen appears press Volume Up to restore the device to its factory settings or any other button to cancel. Once complete press Volume Up to reboot. Was this helpful? Yes | No