Setting up your remote control

Setting up your remote control

Tired of shuffling your TV, set top box, and home theater system remote controls while watching TV? You can combine all of your remote controls into one with HTC remote.
  • Set up the Electronic Program Guide (EPG) first.
  • Make sure HTC One has an Internet connection.
  1. Open the TV app.
  2. Tap > Start.
  3. Enter a name for your remote control, and then tap Next.
  4. Select the devices you want to control with your remote, and then tap Next.
    Note: The TV option can't be deselected.
  5. Select the brand of your TV, and then tap Next.
  6. Make sure your TV is off, and then tap Next.
  7. Point HTC One towards the TV and tap the blinking button on the screen.
  8. Tap Yes if HTC remote was able to turn on your TV, and then follow the onscreen instructions to continue setting up the other devices.
    • If the TV didn't turn on, tap No. HTC remote will try another remote control profile.
    • If HTC remote doesn't find a matching remote control profile, you'll need to manually set up the remote control.
    Tip: To add, edit, or delete remotes, tap > > Add a remote (or Edit/delete).

Customizing the remote control buttons

Are the predefined buttons not to your liking? You can change any button.
  • The channel enter button should not be changed.
  • All of the buttons on the tab should control the same device.
  1. Open the TV app.
  2. Tap > > Button setup.
  3. Tap Remote buttons > Next.
  4. Tap a button to configure.
    Note: Red buttons are buttons that have not been configured.
  5. Place HTC One head to head with your device's remote control. Your HTC One and your device's remote control should be less than 5 cm apart.
  6. On your device's remote control, press and hold the button you want to add to HTC remote.
  7. Tap the blinking onscreen button to test the button.
  8. Tap Yes to finish setting up the button.
    Note: If you tap No, you'll be prompted to try again.
  9. Press until you exit the Button setup mode.
People found this helpful
Select an issue from the dropdown:
*Please enter your comment here ...
Thank You!