GETTING STARTED
nano SIM card
GETTING STARTED

nano SIM card

HTC One uses a nano SIM card.
Use a standard nano SIM card only. Inserting a modified card that is thicker than the standard nano SIM card may cause the card to not fit properly or damage the card slot.

Inserting a nano SIM card

  1. Hold the phone face up.
  2. Insert the tip of the tray eject tool (or a small bent paperclip) into the tray eject hole next to the nano SIM card slot.
  3. Push the tip all the way into the hole until the tray ejects, and then pull the tray out.
  4. Remove the placeholder card from the tray, if there's one pre-inserted.
  5. Place the nano SIM card (contacts facing down) into the tray.
  6. Insert the card tray back into the slot.

Removing a nano SIM card

Important: Make sure to switch off HTC One before removing the card.
  1. Hold the phone face up and the top panel facing you.
  2. Insert the tip of the tray eject tool (or a small bent paperclip) into the tray eject hole next to the nano SIM card slot.
  3. Push the tip all the way into the hole until the card tray ejects.
  4. Pull the card tray out, and remove the nano SIM card.
  5. Make sure that you insert the empty card tray back into the slot.
 
60  People found this helpful
Select an issue from the dropdown:
464858
706
us
3
*Please enter your comment here ...
htc-one-m8
Thank You!
RELATED ARTICLES
topic_tag-hardware-sim_card