Changing camera settings

Changing camera settings

Open the menu panel to access and change camera settings.
To open the camera settings, tap on the Viewfinder screen.
Note: Some camera features are not available when you’re using the front camera, such as scenes, auto focusing, zooming, and face detection.
Self-timer (photo mode only) Set a time delay before your camera automatically takes the photo.
Scenes Choose a scene that best suits the lighting or environment where you're taking your photos and videos.
Image adjustments Slide your finger across each of the slider bars to adjust the exposure, contrast, saturation, and sharpness.
White balance White balance enables the camera to capture colors more accurately by adjusting to your current lighting environment.
Resolution/Video quality Choose a photo or video resolution to use.
ISO (photo mode only) Choose an ISO level or set it back to Auto. Higher ISO numbers are better for taking pictures in low light conditions.
Review duration Set the time for a captured photo or video to be displayed on the Review screen before the camera changes back to the Viewfinder screen.
Storage Choose whether to capture photos and videos to the internal storage or your storage card.
Widescreen (photo mode only) When this check box is selected (default), photo resolutions available for selection are in 17:10 ratio and you can use the entire Viewfinder screen to frame your subject. When not selected, photo resolutions available for selection are in standard 4:3 ratio.
Geo-tag photos (photo mode only) Select to store GPS location in your captured photos.
Auto enhance (photo mode only) Select to reduce noise when using a high ISO setting and to automatically adjust photo brightness.
Auto focus (photo mode only) Enables or disables centered auto focus.
Face detection (photo mode only) Select to automatically recognize faces and adjust the focus when you take people photos. Face detection will be turned off if you disable auto focus.
Shutter sound Select to play a sound when you press the shutter release or record button.
Grid (photo mode only) Select to display a grid on the Viewfinder screen so you can easily frame and center your subject before taking the photo.
Stereo recording (video mode only) Select to record sound in stereo when capturing videos.
Record with audio (video mode only) Select to record audio when capturing videos.
Reset to default Change the camera settings back to default.
People found this helpful
Select an issue from the dropdown:
*Please enter your comment here ...
Thank You!