Battery

Battery

HTC Wildfire S uses a rechargeable battery. How long the battery can last before it needs recharging depends on how you use HTC Wildfire S. Among these are the features and accessories you use (for example, leaving your Bluetooth® connection always on uses more power). Long phone calls and frequent web browsing uses up a lot of battery power. Also, consider your location: poor signal strength from your mobile network and extreme temperature make the battery work harder.

Removing the battery thin film

Before using HTC Wildfire S for the first time, you need to remove the thin film wrapped around the battery.
  1. Take the back cover off.
  2. Open the battery compartment door.
  3. Pull up on the thin film to remove it.

Removing the battery

Important: Right after you take HTC Wildfire S out from the box for the first time, don’t forget to remove the thin film wrapped around the battery that’s inside HTC Wildfire S.
  1. Take the back cover off.
  2. With your thumb or finger, lift the battery from the battery compartment.

Inserting the battery

Important: Please use only original batteries that came in the box or replacements that we recommend.
  1. Take the back cover off.
  2. Insert the battery (with its exposed copper contacts first) into the battery compartment.

Charging the battery

The battery is partially charged when shipped. Before you turn on and start using HTC Wildfire S, it is recommended that you charge the battery. Some batteries perform best after several full charge/discharge cycles.
Important:
  • The battery is already installed in HTC Wildfire S when shipped. A thin film is inserted between the battery and the compartment. You need to remove this film before you can charge the battery.
  • Only the power adapter and USB sync cable provided in the box must be used to charge the battery.
  • Do not remove the battery from HTC Wildfire S while you are charging it using the power or car adapter.
  1. Plug the power adapter into the USB connector.
  2. Plug in the power adapter to an electrical outlet to start charging the battery.
As the battery is being charged, the notification LED shows a solid orange light. The light turns to solid green when the battery is fully charged.

When you charge the battery and HTC Wildfire S is on, the charging battery icon is displayed in the status bar. After the battery has been fully charged, the charging battery icon turns to a full battery icon .

Note: As a safety precaution, the battery stops charging when it overheats.
Related topics
0 บุคคลคิดว่ามีประโยชน์