Podrška - ‎HTC Flyer‎
Wi‑Fi

Wi-Fi

To use Wi-Fi, you need access to a wireless access point or ​“‍hotspot”. The availability and strength of the Wi-Fi signal will vary depending on objects, such as buildings or simply a wall between rooms, the Wi-Fi signal has to pass through.

Turning Wi-Fi on and connecting to a wireless network

  1. From the Home screen, tap > Settings.
  2. Tap Wireless & networks, and then select the Wi-Fi check box to turn Wi-Fi on. HTC Flyer then scans for available wireless networks.
  3. Tap Wi-Fi settings. The network names and security settings of detected Wi-Fi networks are displayed in the Wi-Fi networks section.
  4. If the wireless network you want to connect to is not in the list of detected networks, scroll down the screen, and then tap Add Wi-Fi network. Enter the wireless network settings, and then tap Save.
  5. Tap the Wi-Fi network you want to connect to. If you selected an open network, you will be automatically connected to the network.
  6. If you selected a network that requires a passcode, enter the key and then tap Connect.

When HTC Flyer is connected to the wireless network, the Wi-Fi icon appears in the status bar and tells you the approximate signal strength (number of bands that light up).

The next time HTC Flyer connects to a previously accessed secured wireless network, you won’t be asked to enter the security information again, unless you reset HTC Flyer to its factory default settings.

Connecting to a Wi-Fi network with EAP-TLS security

You may need to install a network certificate (*.p12) to HTC Flyer before you can connect to a Wi-Fi network with EAP-TLS authentication protocol.
  1. Save the certificate file to the root folder of the storage card.
  2. From the Home screen, tap > Settings.
  3. Tap Security > Install from SD card.
  4. Select the network certificate needed to connect to the EAP-TLS network.
  5. Turn on Wi-Fi and connect to a wireless network.

Checking the wireless network status

  1. From the Home screen, tap > Settings.
  2. Tap Wireless & networks > Wi-Fi settings.
  3. Tap the wireless network that HTC Flyer is currently connected to.
A message box is then displayed showing the Wi-Fi network name, status, speed, signal strength, and more.
Note: If you want to remove the settings for this network, tap Forget. If you want to reconnect to a wireless network that you have removed, you'll need to choose the wireless network from the list of available Wi-Fi networks again. If it is a secured wireless network, you'll need to enter the wireless network credentials again.

Connecting to another Wi-Fi network

  1. From the Home screen, tap > Settings.
  2. Tap Wireless & networks > Wi-Fi settings. Detected Wi-Fi networks are displayed in the Wi-Fi networks section.
  3. To manually scan for available Wi-Fi networks, tap > Scan.
  4. Tap another Wi-Fi network to connect to it.

Setting when to disconnect from a Wi-Fi network

You can specify when to switch between Wi-Fi and data connections.
  1. From the Home screen, tap > Settings.
  2. Tap Wireless & networks > Wi-Fi settings.
  3. Tap Wi-Fi disconnect policy, and then choose the policy you want.
1
Da li Vam je ova informacija bila korisna?
Da
Ne