GETTING STARTED
Battery
GETTING STARTED

Battery

Removing the battery thin film

  1. Take the back cover off.
  2. Pull the flap of the thin film out, and then remove it from the battery compartment.

Removing the battery

  1. Take the back cover off.
  2. With your thumb or finger, lift the battery from the battery compartment.

Inserting the battery

Important: Please use only original batteries that came in the box or replacements that we recommend.
  1. Take the back cover off.
  2. Insert the battery (with its exposed copper contacts first) into the battery compartment.

Charging the battery

Before you turn on and start using HTC Sensation XL with Beats Audio, it is recommended that you charge the battery.
Important:
  • Only the power adapter and USB cable provided in the box must be used to charge the battery.
  • Do not remove the battery from HTC Sensation XL with Beats Audio while you are charging it using the power or car adapter.
  1. Insert the small end of the USB cable into the USB connector.
  2. Insert the other end of the USB cable into the power adapter.
  3. Plug in the power adapter to an electrical outlet to start charging the battery.
As the battery is being charged, the notification LED shows a solid orange light. The light turns to solid green when the battery is fully charged.

When you charge the battery and HTC Sensation XL with Beats Audio is on, the charging battery icon is displayed in the status bar. After the battery has been fully charged, the charging battery icon turns to a full battery icon .

Note: As a safety precaution, the battery stops charging when it overheats.
 
People found this helpful
Select an issue from the dropdown:
432
nz
21
*Please enter your comment here ...
htc-sensation-xl
Thank You!
RELATED ARTICLES