Wi‑Fi

Wi-Fi

To use Wi-Fi, you need access to a wireless access point or ​“‍hotspot”.
Note: The availability and strength of a Wi-Fi signal varies depending on objects the Wi-Fi signal has to pass through (such as buildings or a wall between rooms).

Turning Wi-Fi on and connecting to a wireless network

  1. Slide the Notifications panel open, and then tap .
  2. Tap the Wi-Fi On/Off switch to turn Wi-Fi on.
  3. Tap Wi-Fi.

    Detected Wi-Fi networks will be listed.

    Note: If the wireless network that you want is not listed, tap > Add network to manually add it.
  4. Tap the Wi-Fi network you want to connect to.
    Note: If you selected a secured network, you'll be asked to enter the network key or password.
  5. Tap Connect.

When HTC Desire VC is connected to the wireless network, the Wi-Fi icon appears in the status bar and tells you the approximate signal strength.

The next time HTC Desire VC connects to a previously accessed secured wireless network, you won’t be asked to enter the key or other security information again, unless you reset HTC Desire VC to its factory default settings.

Disconnecting from the current wireless network

  1. Slide the Notifications panel open, and then tap .
  2. Tap Wi-Fi.
  3. You can:
    • Tap the wireless network that HTC Desire VC is connected to, and then tap Disconnect.
    • If you want to remove the settings for this network, press and hold the network name, and then tap Forget network.

Connecting to a different Wi-Fi network

  1. Slide the Notifications panel open, and then tap .
  2. Tap Wi-Fi. Detected Wi-Fi networks are displayed.
    Note: To manually scan for available Wi-Fi networks, tap > Scan.
  3. Tap a Wi-Fi network to connect to it.

Connecting to a Wi-Fi network using enhanced security

Important: You may need to install a network certificate (*.p12) to HTC Desire VC before you can connect to a Wi-Fi network with EAP-TLS authentication protocol.
  1. Save the certificate file to the root folder of the storage card.
  2. Slide the Notifications panel open, and then tap > Security.
  3. Tap Install from storage card.
  4. Select the network certificate needed to connect to the EAP-TLS network.
  5. Turn on Wi-Fi and connect to a wireless network.
0 People found this helpful